Premium Blackout Vinyl Roller Shades @ AwardBlinds (2024)

**For a more accurate color comparison we highly recommend that you request free samples prior to placing your order.**

Lift Type

Spring Roller (Cordless) Best for Kids™ - Roller allows you to raise and lower your shade easily with the built-in spring lift. Eliminates the need for cords providing a sleek look and child safe convenience.

Roll Type

Standard Roll The shade material rolls off the back of the roller, allowing the shade to hang closer to the window. Best option for room darkening situations; provides optimal light control. The backside of the shade material will be visible on the roll.

Hem Style

Tailored (Straight) Hem Classic straight tailored hem gives a clean appearance. Hem pocket is heat sealed on the top and sides, concealing the hem bar.

**Product and option images are for illustration purposes only and may not reflect the actual product.**

These Premium Blackout Vinyl Roller Shades offer an unbeatable value and premium quality. The 4 ply duplex construction provides the shade material color on the room side, neutral white on the street side, and a special blackout layer that eliminates light penetration. These blackout shades provide 100% light blockage, no light will pass through the shade itself.

The roller shade material is fade and curl resistant. A fiberglass layer provides long lasting strength and flame resistance. The roller material meets or exceeds federal flame resistance specification ccc - c521e. Heavy duty roller with spring loaded mechanism for years of smooth and trouble free operation. Cordless construction is safe for children and pets.

Note: On all roller shades, the width ordered will be from "tip to tip" of the operating mechanism. For proper operation, the fabric width will be narrower than the width ordered. This can produce small light gaps on each side of the shade. To compensate, you may want to order an outside mounted shade. Also, due to the characteristics of some shade materials, some shades tend to track to one side or the other. These characteristics should not be considered a defect.

This product now has a heat sealed bottom hem pocket (top and sides) not sewn

• Width (min to max): 15" to 72 1/2"
• Height (min to max): 12" to 84"
• Minimum Inside Mounting Depth: 3/4"
• Flush Inside Mounting Depth: 2 1/4"
• Minimum Outside Mounting Surface: 1 1/2"
• Factory Inside Mount Deduction (Width: tip-to-tip): 1/8"
• Factory Inside Mount Fabric Deduction (Width): 1 5/8" (approx) - for proper operation
• Factory Outside Mount Fabric Deduction (Width): 1 1/2" (approx) - for proper operation
• Roller shades will be narrower than the width ordered. To avoid the resulting light gap on each side of the shade and to achieve maximum privacy and light control, consider Outside Mount and overlap the shade accordingly.
• Heavy duty roller with spring loaded mechanism.
• 12 Gauge material is fade and curl resistant.
• Spring Lift (Cordless) shades must be operated in a slow/controlled manner. The shade cannot be released to raise on its own. You must be able to fully reach to the top of the window/shade for proper operation.
• Spring Lift (Cordless) shades have a round pin-end and a flat tab end. The round pin-end has spring tension, that is compressed during installation. When compressed the shade is the correct tip-to-tip measurement.
• Spring Lift (Cordless) shades will have internal catch points where you can stop the shade at. These catch points cannot be adjusted. Multiple shades will not catch/stop at the same exact locations.
• 4 Ply duplex construction provides color on room side, white/neutral color on street side - Cream is the same color to both sides. The backside of the shade material will be visible on the roll.
• Special blackout layer eliminates light penetration - provides 100% blockage of light through the shade material.
• Fiber glass layer for long lasting strength.
• Shades ordered with decorative hems (scallop) come with decorative fringe. Decorative hems may curl as they are not weighted, this is not a defect.
• Universal brackets for inside or outside mount installations. Can be mounted to the top, side, or rear. Brackets are silver color. Bracket covers are not available for this product. No other bracket types available for this product.
• Standard roll only - Not available as reverse roll.
• All factory measurements and deductions can have a ±3/16" variance
• Mounting hardware included (wall anchors and/or specialty screws may be required based on your mounting surface - not included)
• Free Ground Shipping (on all sizes)

• Free Ground Shipping on all Premium Blackout Vinyl Roller Shades orders within the contiguous United States.
• Our Premium Blackout Vinyl Roller Shades are custom made to your specifications and have a typical production time of 2 to 6 business days. Production time starts the business day after your order is placed. Production times are estimates and can vary.
• Shipping time once out of production is 1 to 5 business days depending on the location of the ship-to address.
• We currently only ship to contiguous United States. We cannot ship to P.O. Boxes or Military Bases.

Measuring Instructions

Installation Instructions